Open Access Te Herenga Waka-Victoria University of Wellington
Additively_Manufactured_Polymer_Composites_for_Superconducting_Motor_Coil_Structures.pdf (1.59 MB)

Additive manufacturing materials for structural optimisation and cooling enhancement of superconducting motors in cryo-electric aircraft

Download (1.59 MB)
journal contribution
posted on 2023-10-01, 20:51 authored by Grant LumsdenGrant Lumsden, Bartholomew LudbrookBartholomew Ludbrook, N Rogers Rehn, F Solis Fernandez, Michael DaviesMichael Davies, V Chamritski, S Signamneni, Rodney BadcockRodney Badcock
Superconducting electric motors offer the potential for low weight and high power in applications such as electric aircraft and high speed marine transport. Combined with renewably-sourced cryogenic fuels and advanced fuel cells they offer a path to zero-carbon mass transport. The proposed architectures of these extreme machines, operating at temperatures around 20 K-50 K and employing very high alternating magnetic fields, require materials for the stator that are not electrically conducting and at the same time have good cryogenic structural performance. Additively manufactured (AM) materials can play a key role in these designs, and a collaboration between the Robinson Research Institute and Auckland University of Technology is studying the performance of a range of composite polymers in superconducting machine applications. There are significant challenges to be met, including understanding the effect of the build process on material properties at low temperatures, and also the effect of formulation changes on thermal properties. AM metals can be employed in the rotor components, where the magnetic field fluctuations are very small for our synchronous designs. In this usage case, we can achieve dramatic reductions in the weight of the rotor assembly by minimising the number of joints and facilitating the design of multi-functional components in our helium cooled, vacuum cryostat architecture. Novel design solutions have been developed for several key components in our prototype machines and these are discussed, along with cryogenic testing results for selected AM polymers and composites.


Preferred citation

Lumsden, G., Ludbrook, B., Rogers Rehn, N., Solis Fernandez, F., Davies, M., Chamritski, V., Signamneni, S. & Badcock, R. (2023). Additive manufacturing materials for structural optimisation and cooling enhancement of superconducting motors in cryo-electric aircraft. Superconductor Science and Technology, 36(10), 105014-105014.

Journal title

Superconductor Science and Technology





Publication date





IOP Publishing

Publication status


Online publication date






Article number

ARTN 105014